Enabling HTTP/3 on GOV.UK

Created on November 12, 2023 at 11:35 am

Note: This is an RFC I wrote to persuade the GOV.UK Senior Technology team to enable HTTP/3 on GOV.UK. It was originally posted on the GOV.UK RFCs GitHub repo. It can be viewed here. I’m posting it to my blog so as to own my own work and hopefully give it more visibility.


HTTP/3 is the latest version of the HTTP protocol that is currently in use in production by Facebook ORG and Google ORG , as well as many others. It offers web performance improvements over HTTP/2, specifically when connections with high packet loss are being used. Users on unstable mobile connections and rural areas should see the most improvement with this new protocol adoption.


According to the latest data ( October 2020 DATE ) by MLab ORG , the UK GPE has a median download speed of 20 CARDINAL MBit/s and 7.2 CARDINAL MBit/s upload speed. However, exporting this dashboard data to a spreadsheet paints a very different picture.

The data shows that there are parts of the UK GPE that have connection speeds less than 0.3 MBit/s for both download, and upload. This is roughly equivalent to a 2 CARDINAL G connection. It’s worth noting that as these are median values, many users in these areas will be seeing much lower connection speeds than this in reality. These areas have a connection speed that is 98.5% PERCENT slower than the median for the whole country.

Users in these areas still have a need to access government services and the information that GOV.UK offers, but under these conditions it won’t be a very pleasant experience. These are the users that will benefit from a transition to HTTP/3.

Brief history of HTTP

Each iteration of the HTTP protocol has set out to improve the web performance of the previous version of the protocol.


The first ORDINAL version of the HTTP protocol came with a number of web performance issues, a primary issue being that only a single asset could be downloaded on a Transmission Control Protocol (TCP) connection before the connection was then closed. There was no way for these connections to persist for multiple asset downloads. This resulted in a lot of wasted negotiation time to establish separate TCP connections for each asset.


HTTP/1.1 fixed the persistent connections issue, allowing multiple assets to be downloaded over a single connection once established. Unfortunately this didn’t fully solve the web performance issues seen with the HTTP protocol (stemming from the TCP layer).

Under HTTP/1.1 the browser must download 100% PERCENT of an asset before it can move onto the next asset. Meaning it can only download a single asset at a time per connection, the other assets are blocked. This is called Head-of-Line Blocking (HOL Blocking). Browser vendors quickly tried to solve this issue by allowing a browser to open up to CARDINAL

6 CARDINAL TCP connections per domain, so 6 CARDINAL assets can be downloaded in parallel.

Unfortunately a number of issues still exist with this method:

Most sites have many more than 6 CARDINAL assets per page, so HOL ORG blocking is still occurring in almost every page load under HTTP/1.1. Each TCP connection is independent and have no knowledge of each other. All 6 CARDINAL are fighting for limited bandwidth which in turn can saturate the network. Many websites resorted to “domain sharding” (hosting assets across multiple domains), to allow a browser to open up more that 6 CARDINAL TCP connections. This in turn exacerbated the problem mentioned in point 2 CARDINAL .

Another solution needed to be found.


HTTP/2 is a major iteration on the HTTP protocol. It started life as the SPDY protocol created by Google ORG , which was eventually used as the foundation for HTTP/2. One CARDINAL major shift in this version is the ability to multiplex stream assets over a single TCP connection.

Each TCP packet now includes a set of “frames” that contains additional meta information about each stream. Each asset is downloaded over a separate stream and then reconstructed by the browser. This allows multiple assets to be downloaded at the same time over a single TCP connection, removing the HOL ORG blocking at the application (HTTP) layer. An example of this setup can be seen in the diagram below:

Source: “Head-of-Line Blocking in QUIC and HTTP/3: The Details” by Robin Marx PERSON .

Unfortunately this didn’t solve all the HOL ORG blocking issues. HTTP/2 is built upon TCP: a protocol that offers the reliable transmission of packets. TCP ORG ’s job is to make sure that the packets leaving one CARDINAL device arrive on the other device in exactly the same order, and with no missing packets. If packet loss occurs, TCP re-transmits the packets. Packets behind the missing packet cannot be processed until retransmission occurs, so all assets being transferred on that single TCP connection are held up.

This is where we are currently at with GOV.UK. The vast majority of users on strong, stable connections will have seen improved performance from enabling HTTP/2. Unfortunately, some users may have seen performance drop if they use a connection with high packet loss. This is due to the HOL ORG blocking that now exists at the network layer. This is a primary issue HTTP/3 sets out to solve.


To solve the HOL ORG blocking issue at the network layer, HTTP/3 uses a completely new transport layer protocol called QUIC. QUIC initially stood for “Quick UDP Internet Connections WORK_OF_ART ”, but the IETF now don’t use it as an acronym. It is simply the name of the protocol. QUIC is built upon the User Datagram Protocol LAW (UDP), so isn’t bound by the restrictions of TCP. It has been designed so that the network layer now understands the the concept of independent streams, which was restricted to the application layer under HTTP/2:

In the illustration above, if packet 2 CARDINAL is lost (using HTTP/2), packets 3 CARDINAL -8 are blocked until retransmission occurs. Using QUIC if packet 2 CARDINAL is lost only packets 1 CARDINAL and 3 CARDINAL are blocked since they exist in the same stream. The other streams can progress as normal since they are fully independent. QUIC doesn’t require in-order packet transmission across the whole connection, but it does still retain ordering within each resource stream.

The effect of packet loss

Using WebPageTest we can roughly simulate the effect that packet loss has on performance for our users. For testing I picking a fairly content heavy page like the past Prime Ministers page and a low spec Moto G4 Android PRODUCT device. For the connection speed I’ve picked on one of the worse case scenarios from the MLab ORG data. I’m emulating the connection the village of Colintraive GPE has, which reportedly has a 450/230 Kbps MONEY connection speed. This is a connection speed equivalent to a 2 CARDINAL G or slow 3 CARDINAL G connection.

Visual filmstrip

Below we can see a comparison of the page load under different packet loss conditions using HTTP/2. The top is the baseline, with 0% PERCENT packet loss, progressing all the way down to 3% PERCENT packet loss:

As you can see, the visually complete metric sits at 9.5 seconds TIME with no packet loss, but jumps to 13.5 seconds TIME with 3% PERCENT packet loss. This is a 42% PERCENT increase.

Visual progress graph

The visual progress graph clearly shows the effect packet loss has on page load times. As the packet loss increases, the page load slows down:

HTTP/3 + QUIC is designed to help improve the page load speed for users experiencing these connection conditions in the real world.

Connection quality measurement

Is it possible to measure the connection quality that our users are experiencing when visiting GOV.UK. Fastly provide a range of Varnish Configuration Language ORG (VCL) options that we can use to monitor the quality of user connections should we wish to capture this data:

client.socket.ploss – An estimate of the packet loss on the current connection. Provides a ratio from 0-1 CARDINAL . 0 = no loss.

client.socket.tcpi_rtt – The PERSON round trip time ( RTT ORG ) for the current TCP connection to the client. RTT ORG is used for loss detection and congestion control across the connection.

client.socket.tcpi_rttvar – Measures the variance in RTT ORG of the connection. The higher the variance value, the less stable the connection.

client.socket.tcpi_delivery_rate – Gives a recent value for the delivery bandwidth to the client in bytes per second ORDINAL .

Our Users

Since HTTP/3 + QUIC offers better performance for users on unstable connections, it is essentially fixing performance for those who were left behind during the transition to HTTP/2. These users are likely to be those who are in the most need of this performance increase.

Since COVID-19 many people have had to work from home. Many will be in rural areas where high-speed internet access either isn’t available, or is expensive. In more populated area many users could still be on ageing cable / DSL connections with high contention ratios.

The aim of this transition to HTTP/3 is to allow an ever more diverse level of user connection quality to access GOV.UK, essentially maximising access for all users, no matter what connection they use. By focusing on the long-tail of our users with poor connections, we can effectively shorten it and in doing so make the internet “good enough” to use in more situations. This is all without effecting performance for users already on a good internet connection.

Browser support

The support for HTTP/3 + QUIC in browsers is visible on Caniuse ORG .

The browsers support for HTTP/3 at the time of writing is:

Chrome – Enabled (see Chromium ORG blog)

Edge (chromium version) – Enabled

Firefox – Enabled in the next version ( 88 CARDINAL )

Safari PERSON 14 – Disabled (currently behind a feature flag)

Looking at the March 2021 DATE analytics, approximately 55% PERCENT of GOV.UK users are using a browser that can now take advantage of HTTP/3 + QUIC. This is close to the 66% PERCENT that the CanIUse data estimates for HTTP/3 usage globally.

Usage on the web

Although the HTTP/3 and QUIC specifications are still in draft, they are both used in production on large sites with billions CARDINAL of daily DATE page views:

YouTube ORG

In the image below we see Chrome 89 LAW (latest stable) connecting to YouTube ORG and using h3-Q050 . This is HTTP/3 with the latest version of Google ORG QUIC ( Q050 ).

Google Search ORG

In the image below we see Chrome 89 LAW (latest stable) connecting to Google Search ORG and using h3-Q050 . This is HTTP/3 with the latest version of Google ORG QUIC ( Q050 ).


Facebook are using HTTP/3 and QUIC in production, but are using the IETF version of QUIC ( h3-29 ). Below we see Firefox 88 LAW connecting via HTTP/3:

Other advantages to HTTP/3 + QUIC

I’ve only covered a single advantage related to packet loss with web performance above, but HTTP/3 + QUIC comes with a number of other advantages:

Improvement in connection startup times via TLS ORG v1.3 + 0-RTT

Better security via end-to-end encryption at the transport layer

Establish NORP an ecosystem that is easier to evolve from our current TCP usage

Eventually our users will also be able to take advantage of Connection Migration ORG , where QUIC end-points will be able to migrate connections to different IP addresses and network paths at will.

Connection migration is an optional part of the specification that isn’t currently implemented anywhere. Once enabled it will allow a users device to seamlessly transition between multiple QUIC connections (e.g. Cellular to known Wi-fi). This is achieved by introducing the concept of a connection ID that is carried by QUIC packets, which can be used to identify a connection.

A user is likely to find this useful if they are live streaming data (web conferencing, large file upload / download, real-time navigation etc). A live demo of this technology in cation can be found here.

Since this is optional in the QUIC specifications, realistically its practical adoption may be a number of years DATE away.


Our move to HTTP/3 + QUIC offers web performance gains to users on unstable, high packet loss connections. These users were left behind in the migration to HTTP/2 across the web platform. These web performance gains will come with no loss in performance to users already on a strong, stable connection. All our users will have an improvement in security, as well as improvements in connection startup times.

It has never been more important to fix issues for our long-tail users, since many will now be working from home due to the Coronavirus (COVID‑19). Users no longer working in an office environment may now be limited to unstable connections in rural areas, or tethering via limited mobile data plans, or using a connection in populated inner-city area with a high local contention ratios.

Any browsers that don’t support HTTP/3 + QUIC will fallback to HTTP/2 + TCP. Therefore HTTP/3 can be enabled using the progressive enhancement methodology.


Fastly have now announced HTTP/3 + QUIC is available to all customers as it is out of Limited Availability ORG ( LA GPE ) and the beta phases. Enabling HTTP/3 + QUIC for us involves switching it on via the Fasty UI. No modifications are needed to our application code, or servers. And since we have already invested work in optimising for HTTP/2, we are already well prepared for a migration to HTTP/3. So no modifications are needed to our frontend applications.

There is a CNAME config change required if we don’t use a dedicated Fastly IP address once enabled in the UI LOC . From the documentation:

Unless you use Fastly’s dedicated IP addresses, then as a final step to enabling HTTP/3, you must ensure the DNS ORG records of your domains are routing users to the correct HTTP/3 enabled Fastly addresses by using one CARDINAL of the following CNAMEs:

0RTT enabled? IPv4 and IPv6 dual stack routing IPv4-only routing Yes dualstack.n.sni.global.fastly.net n.sni.global.fastly.net No dualstack.m.sni.global.fastly.net m.sni.global.fastly.net

I know GOV.UK currently has IPv6 enabled, so if a CNAME change is required I propose we use 0-RTT = No ( dualstack.m.sni.global.fastly.net ), since I belive Firefox is still the only browser that supports it. We can always enable this at a later date quite easlily once it becomes more promenant in browsers.

Note: According to Richard Towers PERSON , we currently don’t use dedicated Fastly IP ORG ’s so the CNAME change will be required, this shouldn’t be a major issue because we have a couple of levels of CNAME in place (we don’t need to talk to JISC). It’s also worth noting that TTL ORG on prod is 300 seconds TIME ( 5 mins TIME ), which should be short enough for the change when made.

I’ve opened an additional RFC-147, that will allow us to distinguish users using HTTP/2 and HTTP/3 in SpeedCurve GPE RUM. I believe we should impliment this RFC first ORDINAL then allow it to capture user data for 1-2 months DATE , before we enable HTTP/3. This will allow us to quantify the before / after change in our RUM metrics, which would make for an interesting PR piece from a web performance and user focus point of view. So I’d propose to enable HTTP/3 some time in July / August 2022 DATE .

Connecting to blog.lzomedia.com... Connected... Page load complete